BQTHC - EUTECSIL 1030 FC
- MSDS: BQTHC
- Manufacturer: EUTECTIC CORP
- Product Name: EUTECSIL 1030 FC
- National Stock Number: 3439-00N036313
Product Identification
Product ID:EUTECSIL 1030 FC
MSDS Date:09/18/1986
FSC:3439
NIIN:00N036313
MSDS Number: BQTHC
Responsible Party
FLUSHING, NY 11358-9981
US
Emergency Phone: 718-358-4000
Info Phone: 718-358-4000
Cage: 72271
Contractor
Telephone: 704-527-9800/ 800-221-1433
Cage: 72271
Ingredients
LITHIUM CHLORIDE
CAS: 7447-41-8
RTECS: OU5950000
PROVIDE PROT SCREENS & FLASH GOGG, IF NEC, TO
RTECS: 9999999ZZ
DARK TO SEE WELD ZONE. THEN GO TO NEXT LIGHTER SHADE
RTECS: 9999999ZZ
ARC. REASONABLY EXPECTED CONSTITUENTS OF FUME
RTECS: 9999999ZZ
OTHER MATERIALS LISTED IN INGREDIENTS.
RTECS: 9999999ZZ
DEPOSITS IN LUNGS) & MAY AFFECT PULM FUNC.
RTECS: 9999999ZZ
SILVER & SILVER CMPDS STAIN
RTECS: 9999999ZZ
TO COPPER & COPPER OXIDE HAVE BEEN RPTD IN
RTECS: 9999999ZZ
CAUSE PULM EDEMA & PNEUM. ARC RAYS CAN INJURE EYES &
RTECS: 9999999ZZ
CADMIUM. CANCER HAZ. AVOID CREATING DUST. CAN CAUSE
RTECS: 9999999ZZ
IN WORKER'S BRTHG ZONE.
RTECS: 9999999ZZ
SILVER
CAS: 7440-22-4
RTECS: VW3500000
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
1.0 MG/M3 DUST;
CAS: 7440-50-8
RTECS: GL5325000
OSHA PEL SEE INGREDIENT NAME
ACGIH TLV: SEE INGREDIENT NAME
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
0.05 MG/M3
CAS: 7440-43-9
RTECS: EU9800000
OSHA PEL SEE 1910.1027
ACGIH TLV: 0.01 MG/M3 DUST;9394
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
ZINC (PEL/TLV AS ZINC OXIDE)
CAS: 7440-66-6
RTECS: ZG8600000
OSHA PEL 5 MG/M3 FUME;10TDUST
ACGIH TLV: 5 MG/M3 FUME;10TDUST
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
BORON OXIDE; (BORIC ACID)
CAS: 1303-86-2
RTECS: ED7900000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9293
POTASSIUM FLUORIDE (PEL/TLV AS F)
CAS: 7789-23-3
RTECS: TT0700000
OSHA PEL 2.5 MG/M3
ACGIH TLV: 2.5 MG/M3
SODIUM FLUORIDE (PEL/TLV AS F)
CAS: 7681-49-4
RTECS: WB0350000
OSHA PEL 2.5 MG/M3
ACGIH TLV: 2.5 MG/M3
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
POTASSIUM BORATE
CAS: 11128-29-3
POTASSIUM CHLORIDE
CAS: 7447-40-7
RTECS: TS8050000
SODIUM CHLORIDE
CAS: 7647-14-5
RTECS: VZ4275000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:FUMES & GASES MAY BE INHALED & CAN BE
DANGEROUS TO YOUR HLTH. SKIN/EYE CONT MAY OCCUR W/FLUXES & CHEM
AIDS.ACUTE:SHORT TERM OVEREXP TO WELD FUMES MAY RSLT IN DISCOMFORT
SUCH AS DIZZ/NAUS/DRY/IRRIT OF NOSE, THROAT/EYES. ING 1: SALTS OF
SILVER ARE CORR. ULCERATION & EYE BURNS ARE TREATED BY USING
COPIOUS(EFTS OF OVEREXP)
Explanation of Carcinogenicity:CADMIUM: GROUP 2A(IARC), ANTICIPATED TO
BE CARCINOGEN(NTP), OSHA REGULATED.
Effects of Overexposure:HLTH HAZ:AMTS OF WATER.ING 2:METAL FUME FEVER
CAN BE CAUSED BY FRESH COPPER OXIDE FUME. ING 4:CHILLS/BRTHG
DFCLTY, FEVER, COUGH, MUSCULAR PAIN/NAUS & VOMIT. RECOVERY
GENERALLY COMPLETE. FLUORIDE CMPDS EVOLVED MAY CAUSE SKIN & EYE
BURNS, PULM EDEMA, BRONCH. CHRONIC: LONG TERM OVEREXP MAY LEAD TO
SIDEROSIS (IRON (ING 16)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:REMOVE TO WELL VENTD AREA. CALL FOR MED AID. EMPLOY FIRST AID
TECH RECOM BY AMERICAN RED CROSS. INHAL: REMOVE TO FRESH AIR.
SUPPORT BRTHG (GIVE O*2/ARTF RESP) . INGEST: CALL MD IMMED . SKI N:
FLUSH WITH COPIOUS AMOUNTS OF WATER.CALL MD . EYE: IMMED FLUSH WITH
POTABLE WATER FOR A MINIMUM OF 15 MIN, SEEK ASSISTANCE FROM MD .
Fire Fighting
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONFLAMM. WELDING ARC & SPARKS & BRAZING
FLAMES CAN IGNITE COMBUSTIBLES & FLAMMABLES. REFER TO ANSI Z49.1
FOR FIRE PREVENTION DUR USE OF WELDING & ALLIED PROC.
Accidental Release
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:ONE RECOM WAY TO DETERM COMPOSITION
QTY OF FUMES & GASES TO WHICH WORKERS ARE EXPOS IS TO TAKE AN AIR
SAMPLE INSIDE WELDER'S HELMET IF WORN/ (ING 21)
Other Precautions:READ & UNDERSTAND MFR'S INSTRUC & PRECAUTIONARY LBL
ON PROD. (SEE AMERICAN NATL STD Z49.1 "SFTY IN WELDING & CUTTING"
PUBLISHED BY AMERICAN WELD SOCIETY, P.O. BOX 351040, MIAMI, FL
33135 & OSHA PUBLIC ATION 2206 (29CFR1910, U.S. GOVT(SUPDAT)
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD RESPIRABLE FUME RESP/AIR
SUPPLIED RESP WHEN WORKING IN CONFINED SPACE/WHERE LOCAL
EXHAUST/VENT DOES NOT KEEP EXPOS BELOW RECOM EXPOS LIM.
Ventilation:USE ENOUGH GEN VENT & LOC EXHAUST @ ARC/BOTH TO KEEP FUMES
& GASES FROM WORKER'S BRTHG ZONE & GEN AREA. TRAIN (SUPP DATA
Protective Gloves:WELDER'S GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LENGTH FSHLD.
Other Protective Equipment:WEAR HAND, HEAD & BODY PROD WHICH HELP TO
PVNT INJURY FROM RADIA, SPARKS, & ELEC SHOCK. SEE ANSI Z49.1. @ A
(SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: PRINTING OFFICE, WASHINGTON, D.C. 20402 FOR MORE DETAIL).
VENT: WORKER TO KEEP HEAD OUT OF FUMES. OTHER PROT EQUIP: MIN, THIS
INCL ARM PROTECTORS, APRONS, HATS, SHOULDER PROT, AS WELL AS D ARK
SUBSTANTIAL CLTHG. TRAIN WORKER NOTTO TOUCH LIVE ELEC PARTS & TO
INSULATE HIMSELF FROM WORK & GROUND. (ING 12)
Chemical Properties
HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:GASEOUS RXN PROD MAY INCL CARBON
MONOXIDE & CARBON DIOXIDE. OZONE & NITROGEN OXIDES MAY BE FORMED BY
RADIA FROM (ING 14)
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE, AN D LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.